Legrand DS4000 Obstacle Avoidance Manuel d'utilisateur télécharger pdf (Page 5)

Step 5. Measure Cover distance from top of Divider.

Step 7. Snap on Cover. Step 8. Install Elbow Cover and Inside Corner Trim.

Measure

Step 6. Trim Cover on side as shown.

Cut

NOTE: To remove Cover or install a Tamper Resistance Kit, refer to page 6 of this instruction sheet.

1 2 3 4 5 6 7 8

Pas de commentaire

Legrand DS4000 Obstacle Avoidance Manuel d'utilisateur Page 5