Legrand DS4000 Obstacle Avoidance Manuel d'utilisateur télécharger pdf (Page 2)

To use the DS4075 as a transition to Wiremold 500 Series or 700 Series Raceway:

Step 1. Install 500/700 Adapter into the opening with supplied

screws. If using power in both channels, seal off the

other channel with another 500/700 Adapter.

Step 2. Install 500 Series Raceway per instructions.

Step 3. To cross over from the top Channel, remove the

Knockout and install provided Grommet.

Step 4. Install Shroud to isolate Cables as shown.

Step 5. Install DS4000C Cover and DS4075 Fitting Cover to

complete installation.

NOTE: To remove Cover or install a Tamper Resistance Kit, refer to page 6 of this instruction sheet.

1 2 3 4 5 6 7 8

Pas de commentaire

Legrand DS4000 Obstacle Avoidance Manuel d'utilisateur Page 2