Legrand WSME Series Enhanced Power Base Manuel d'utilisateur télécharger pdf

Wiremold

WSME Series Power Base

Installation Instructions

No: 1 010 852 – 0312

Catalog Number(s): WSMEUTBK, WSMEUTSL, WSMEDUTBK, WSMEDUTSL



Legrand/Wiremold electrical systems conform to and should be properly

grounded in compliance with requirements of the current National

Electrical Code or codes administered by local authorities.

All electrical products may present a possible shock or ﬁre hazard if improperly

installed or used. Legrand/Wiremold electrical products may bear the mark

of a Nationally Recognized Testing Laboratory and should be installed in

conformance with current local and/or the National Electrical Code.

Country of Origin: Made in U.S.



5 1/4" x 3"

[133mm x 76mm]







1. Provide 5.25" x 3" [ 133mm x 76mm] cutout at

location Power Base will be mounted.

2. Attach Power Base to surface from underside using 6

screws (not included) as shown in Figure 1.

 



3. Connect power cables as shown in Figure 2.

4. Connect data jacks, if provided, as needed.





Power Box









 

1 2

Wiremold® WSME Series Power BaseInstallation Instructions No: 1 010 852 – 0312Catalog Number(s): WSMEUTBK, WSMEUTSL, WSMEDUTBK, WSMEDUTSL 

Pas de commentaire

Legrand WSME Series Enhanced Power Base Manuel d'utilisateur