Legrand SPDU8-1U User Manual Manuel d'utilisateur Page 1

User’s Manual 2008Power Commander IQNetwork ControlledSPDU8-1U, SPDU16-2U, SPDU20-0U Wiremold/Legrand®electrical systems conform to and should be prop

73.9 AutoPing and Power Reboot:Each power outlet has optional settings that a NP system usesto ping network equipment. The pinged equipment is attach

85.1 Starting Configuration Menu:There are four ways to start the Configuration Menu: 1) Local Master Port access method. Run a terminal programfrom

9From Figure 15, System Main Menu (Terminal Screen):Option 1 - Reboot a power outlet: Reboots a power outlet.Rebooting executes if the outlet is unres

105.3 System Access Setup Menu• System(Device) name: Assign a system name, sometimesreferred as site or device name.• Date and Time: Enter calendar d

115.4 TCP/IP Network Configuration Menu:This is a submenu of System Main Menu.• Obtain IP using DHCP: Enable or disable DHCP. The purpose of using DH

125.5 More about Emailing Access:5.5.1 Sending Control command to the system:A control command is placed in the email subject field. It hasthe follow

• Baud Rate: The system supports the following baud rates:2400, 4800, 9600, 19200, 38400, 57600 and 115200. It isstrongly recommended that Master port

14• Power Outlet Name: Define a name for the power outlet. • Power Outlet: Set the power outlet to power on or off state. • Power Outlet Timer: Enable

• Timer Start Time: Specify starting time for the timer. Thestarting time is the actual calendar date and real-time clock.Once a timer reaches this sp

165.8 User Account Management Menu:User account management includes reserving or un-reservingeach serial console ports and power outlets to a current

Copyright Notice Copyright©2008 by Wiremold/Legrand. The material discussedin this manual is the proprietary property of Wiremold/Legrand.AII retains

Wiremold/Legrand warrants, to the original purchaser or owneronly, that any product manufactured and sold byWiremold/Legrand will be substantially fre

RS-232 — DB9 FEMALE RJ45 (8-PIN)RJ45 (8-PIN)RS-232 — DB9 MALE18APPENDIX B SERIAL CONSOLE PORT INTERFACESPIN # NAME LONG NAME DIRECTION DESCRIPT

1 SYSTEM DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11.1 Products Comparison Chart:1 SYSTEM DESCRIPTIONThe above listed systems provide secure and versatile powerreboot management access for communicat

2equipment stops responding the ping request, the equipmentwill be power rebooted.• Scheduling AC outlet power cycling periodically or perweekly plann

31. Power Outlet status LEDs: Visual indication of user poweroutlet On/Off status.2. NP system power On/Off status LED: Indication of system power On/

43.2 User Privileges and Port Reservations:All user levels, including anonymous (visitor), are able to accessthe system via a serial connection from

53.6 Web Access:You need to obtain the system IP address before starting webaccess to the system. Please refer to the Telnet Access sectionfor method

6Figure 12 - Implemented MIB Description, List of MIB objectDEFINITION OID RETURNED MESSAGEsystemModel .1.1 System Model number. Read only.systemName