Legrand OFR Series Overfloor Raceway Device Boxes Manuel d'utilisateur télécharger pdf (Page 2)

6. Attach device box cover using (4)

8-32 round head screws.

If raceway is to extend beyond the device box, follow the following steps

for altering the device box to accept a second section of raceway.

7. Remove base extension from base.

This part is no longer needed.

8. Remove breakaway tab on end of divider.

9. Remove breakaway tab on end of cover. First

break corners as shown in 9A. Second twist the

center of the tab 9B until it breaks free.

10. Complete installation using steps 1 trough 6.

1 2 3 4 5 6 7 ... 11 12

Pas de commentaire

Legrand OFR Series Overfloor Raceway Device Boxes Manuel d'utilisateur Page 2