Legrand DS4015 Tee Fitting Manuel d'utilisateur télécharger pdf (Page 3)

Cover Removal with 650RT

FITTING COVER REMOVAL – Fitting Cover can be removed using two methods:

Cover Removal with Screwdriver

Step 1. Locate Dimple on Fitting and use as guide to drill

3/16" [5mm] hole for Tamper Resistant Screw.

To make the Fittings fully tamper resistant, use part no. DSTRK.

Step 2. Install Tamper Resistant Screw through drilled hole in the

Cover into the tab with hole on the Fitting Base.

Step 3. Installation complete.

1 2 3 4

Pas de commentaire

Legrand DS4015 Tee Fitting Manuel d'utilisateur Page 3