Legrand MRP6 Manuel d'utilisateur télécharger pdf

ADVANCED OPERATION

Groups

Use a Miro Wireless Plug-In Lamp Module in conjunction with MRD8 Wireless

Multilocation Controllers to control one plug-in lamp outlet from multiple

locations. Binding the lamp module and MRD8 devices together in the same

Group lets you operate the lamp module from any of the control locations.

You can include other Miro wireless devices in the Group. All devices in the

Group operate when one member operates. If, for example, you increase the

brightness on one device in the Group, all devices will increase brightness.

Set the House ID (see Set House ID) before setting up Groups.

1. Go to any device that you want to include in the Group. Press

. The device

LED ﬂashes yellow, and all other devices in the House ﬂash green. You now

have 5 minutes to complete this process.

2. To include or exclude a device in the Group press

on the device until the

LED changes color. Yellow ﬂashing LED = Included in the Group

Green ﬂashing LED = NOT included in the Group

If you get to a device and it is NOT ﬂashing, the 5 minute binding process

timer may have expired. Go back to step 1 and repeat.

3. Return to the device used in step 1 and press

to terminate Group binding.

All LEDs revert to solid green. Now, all the devices in the Group control their

load circuit in exactly the same manner.

Adding a Module to a Group in an Existing System

1. Go to a device that is in the Group where you want to add the module.

Press

. The device LED and all members of the Group ﬂash yellow. The

new module ﬂashes green.

2. Press

on the new module until its LED ﬂashes yellow.

3. Return to the device used in step 1 and press

. All LEDs are solid green.

Deleting a Module from a Group in an Existing System

1. Go to a device other than the one you’re deleting that is in the existing

Group. Press until the LED ﬂashes yellow on each member of the Group .

2. Press

on the module you want to remove, until its LED ﬂashes green.

3. Return to the device used in step 1 and press

. All LEDs turn solid green.

Scene Control

The Miro wireless plug-in lamp module may be easily incorporated into room

and whole house preset scenes. The Miro Installation Guide provides more

information about conﬁguring scenes and presets.

Instructions for installation and use are included with the relevant Miro

wireless room and whole house control devices. Application support

information and the Miro Installation Guide is available online.

1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1 - ADVANCED OPERATION

ADVANCED OPERATIONGroupsUse a Miro Wireless Plug-In Lamp Module in conjunction with MRD8 Wireless Multilocation Controllers to control one plug-in lam

Page 2 - TROUBLESHOOTING

CLEANINGClean using only a cloth dampened with water and a little mild detergent.Use of solvents or hydrocarbon-based cleaners may cause permanent dam

Page 3 - FCC NOTICE

FCC NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These

Page 4 - Installation Instructions

MRP6Wireless Plug-In Lamp ModuleSpecificationsOperatingVoltage ...120VAC,60HzMaximum Load Rating ...

Page 5 - UNIT DESCRIPTION

UNIT DESCRIPTION The Miro™ MRP6 Wireless Plug-In Lamp module provides convenient dimming control for most ﬂoor and table lamps. This simple plug-in mo

Page 6 - INSTALLATION

INSTALLATION1. PlugtheMirowirelesslampmoduleintoaconvenient15amp120Vgroundedreceptacle.2. Plug the lamp into the grounded 15amp outlet o

Page 7 - SET HOUSE ID

SET HOUSE IDAll Miro wireless devices installed in the same home must acquire the same unique House ID before use. This process is known as house bind

Page 8 - Replacing Lamps

OPERATION Tap once Fade the load to its last-used level Tap twice Full bright – – Press and hold Increase the present level T

Page 9

4-FOLD•Print:2-sides•InkColor:Black•Paper:White16lb(60g/msq) Uncoated, prefer recycled stock•Finaltrimsize:16”(Wide)x6”(High).•Fou