Legrand K/KP deQuorum Worksurface Flip-Up Portal Manuel d'utilisateur télécharger pdf

deQuorum

™

Work Surface Flip-Up Portal – KP Series

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 42671R2 – Updated April 2005

Wiremold Electrical Systems conform to and should be installed

and properly grounded in compliance with requirements of the

current National Electrical Code, Canadian Electrical Code or

codes administered by local authorities.

All electrical products may represent possible shock or fire hazard

if improperly installed or used. Wiremold electrical products are UL

Listed to U.S. and Canadian safety standards, made for interior

use only, and should be installed in conformance with current local

and/or the National Electrical Code.

COMMUNICATIONS INSTALLATION

FOR USE IN DRY LOCATIONS ONLY! NOT FOR USE IN FLOORS

The provided receptacle is dust and splash resistant only. If liquid enters the unit, promptly disconnect breaker or unplug power

and allow to dry thoroughly.

The communication compartment

has two grommeted openings. One

communication cable can be

passed through each grommet.

With template provided, use an electric drill with

1/2" [12.7mm] bit to drill corner pilot holes.

Use a portable jigsaw to cut along the inside edge of the

template line. Test fit the enclosure to the hole cut. Carefully

file opening with wood rasp if required.

From under the table surface, attach

mounting brackets into corresponding

slots in the enclosure body for each

side. Tighten captive fastener until it

comes in contact with underside of

table. Tighten until snug. Do not over-

tighten.

Make final terminations. Plug cord into

a proper electrical receptacle. GFCI

protected circuits are recommended

HOLECUT INSTALLATION

Connect any electrical feed

and communications and drop

enclosure into opening

Wiremold / Legrand

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251

Canada:

570 Applewood Crescent • Vaughan, Ontario L4K 4B4

1-800-723-5175 • FAX 905-738-9721

42671R2 – Updated April 2005 – For latest specs visit www.wiremold.com

CORD-ENDED

FIELD-INSTALLED

1 2

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

deQuorum™ Work Surface Flip-Up Portal – KP SeriesINSTALLATION INSTRUCTIONSInstallation Instruction No.: 42671R2 – Updated April 2005Wiremold Electri

Page 2 - DO NOT COPY OR SCALE!

For additional dimensional information and installation templates – please visit the CAD file section atwww.wiremold.comCAUTION: When printing copies

Commentaires sur ces manuels

Pas de commentaire

Legrand K/KP deQuorum Worksurface Flip-Up Portal Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Legrand K/KP deQuorum Worksurface Flip-Up Portal. Legrand K/KP deQuorum Worksurface Flip-Up Portal User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Legrand K/KP deQuorum Worksurface Flip-Up Portal