Legrand DS4000 Downward Facing Activation Plates Manuel d'utilisateur télécharger pdf

DS4000 Downward Facing

Activation Plates

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 43426 – December 2005

Wiremold / Legrand Electrical Systems conform to and should be

installed and properly grounded in compliance with requirements

of the current National Electrical Code, Canadian Electrical

Code, or codes administered by local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are UL listed to U.S. and Canadian safety

standards, made for interior use only, and should be installed

in conformance with current local and/or the National

Electrical Code.

Step 1. Identify the locations along the DS4000 Series Raceway Base where activations are needed.

Products Covered: DSDWNR, DSDWND, DSDWNX

Installed DS4000 Raceway Base

DS4000WC Wire Management Clips

(included with DS4000 Series Raceway Base).

Step 2. Wire Device and attach to Bracket. Snap into

place as shown.

Tighten

A #10-32 Ground

Screw is provided on

all device brackets.

Hook

Rotate and

Snap into

Place

Step 3.

For more information, visit www.wiremold.com/ds4000.

For installation of Downward Facing Devices (DSDWND, DSDWNR) fed from the lower channel

of DS4000 Raceway:

1 2 3 4

Résumé du contenu

Page 1 - Activation Plates

DS4000 Downward FacingActivation PlatesINSTALLATION INSTRUCTIONSInstallation Instruction No.: 43426 – December 2005Wiremold / Legrand Electrical Sys

Page 2

Step 1. Remove Knockout and install Grommet.Step 2. Install Bracket with wired device.Step 3.Step 4.Install supplied Grommet.Mount Bracket in lower ch

Page 3 - Configuration B

Shroud Configurations:Cover Installation:Bypass with Low Profile Shroud. Recommended forReceptacles and shallow Communication Devices.Bypass with Stan

Page 4

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6