Legrand ALDS4000 Designer Series Large Raceway Elbow Fitti Manuel d'utilisateur télécharger pdf

ALDS4000 Elbow Fittings

INSTALLATION INSTRUCTIONS

Installation Instruction No.: 43372R1 – Updated April 2006

Wiremold / Legrand Electrical Systems conform to and should be

installed and properly grounded in compliance with requirements

of the current National Electrical Code, Canadian Electrical

Code, or codes administered by local authorities.

All electrical products may represent possible shock or fire

hazard if improperly installed or used. Wiremold electrical

products are UL listed to U.S. and Canadian safety

standards, made for interior use only, and should be installed

in conformance with current local and/or the National

Electrical Code.

Step 1. Drill mounting hole into the base. Line the hole up

with the screw clearance groove in a coupling.

Step 2. Mount fitting to wall with #8 screws. (Not provided)

Install couplings as shown.

Step 4. Snap on fitting covers as shown.Step 3. Install raceway base. Refer to Raceway base

installation instructions for proper mounting.

Step 5. Install raceway covers to complete installation.

Products Covered: ALDS4011, ALDS4015, ALDS4017, ALDS4018, ALDS4010A & ALDS4010B

For more information, visit www.wiremold.com/ds4000.

TO MOUNT ALDS4011, ALDS4015, ALDS4017, ALDS4018:

1 2 3 4

ALDS4000 Elbow Fittings 1

Résumé du contenu

Page 1 - ALDS4000 Elbow Fittings

ALDS4000 Elbow FittingsINSTALLATION INSTRUCTIONSInstallation Instruction No.: 43372R1 – Updated April 2006Wiremold / Legrand Electrical Systems conf

Page 2

ALDS4015: Installed fitting base. ALDS4015: With covers installed.ALDS4017: Installed fitting base. ALDS4017: With covers installed.ALDS4018: Installe

Page 3

Step 1. Insert ALDS4010A Entrance End Fitting onto theend of ALDS4000B Raceway Base and tightenscrews to secure.Step 2. Snap ALDS4000C Raceway Cover s

Page 4

Wiremold / LegrandU.S. and International: 60 Woodlawn Street • West Hartford, CT 061101-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6