Legrand 895 Series Floor Box Covers v.2 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Legrand 895 Series Floor Box Covers v.2. Legrand 895 Series Floor Box Covers v.2 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Walkerbox
®
Floor Box Covers
895/896 Series
INSTALLATION INSTRUCTIONS
1. Locate the outlet box and
remove the top protector cap.
2. Pull necessary wires, following
the National Electrical Code
and/or local codes.
3. If using a box with adjusting
screws, adjust the floor
plate to the proper height.
4. Apply a bead of acrylic latex
around the box, sealing the
opening between the box
and the adjacent concrete.
5. Install a listed wiring
device (not supplied by
Walker), the fill-in plate
(if required) and gasket.
6. Attach the floor cover
(895 or 896) using the
brass screws provided.
Fasten securely.
7. Install the screw plugs
or close covers when
receptacle is not in use.
IA0160 0200
© 2000 The Wiremold Company
Walker
®
electrical systems conform to and
should be properly grounded in compliance
with requirements of the current National
Electrical Code or codes administered by
local authorities.
All electrical products may present a possible
shock or fire hazard if improperly installed or
used. Walker electrical products may bear the
mark as UL Listed and/or Classified and should
be installed in conformance with current local
and/or the National Electrical Code.
895 Series
896 Series
Walker Systems, Inc.
1000 Innovation Drive, Williamstown, WV 26187
Vue de la page 0
1

Résumé du contenu

Page 1 - Walkerbox

Walkerbox®Floor Box Covers895/896 SeriesINSTALLATION INSTRUCTIONS1. Locate the outlet box and remove the top protector cap.2. Pull necessary wires, fo

Commentaires sur ces manuels

Pas de commentaire